 |
 |
Iridium Antennas
- RST710 – Mast Mount Antenna
- RST520 – Active
- RST714 – Iridium Whip Antenna
- RST715 – Magnetic Antenna
- RST719 – Aeronautical Antenna
- RST720 – Bolt Mount Antenna
- Prices & Call Plans
| RST710 – Mast Mount Antenna |
Iridium Pole Mount Antenna RST710 is designed for Maritime based applications. Designed to work with Beam Communications and will work with other Iridium based devices. Antenna cable connection is inside the antenna and protected from the environments.
|
| RST520 – Active |
Beam RST520 Active Iridium Antenna can support up to 55m of LMR400 cable and longer cable runs can be supported with lower loss cables. Designed for harsh environments, the RST520 consists of two dipole antenna, one antenna for transmit and one for receive. A power amplifier within the base and connected to the transmitting antenna compensates for signal loss incurred mainly by the connecting cable. Similarly, a low noise amplifier is attached to the receiving antenna via a low loss inter-digital filter to boost the signal sent to the telephone. The inter-digital filter has a bandwidth of 12 MHz centred on the Iridium band designed to attenuate any out of band interference that may arise, for example from nearby Inmarsat uplinks.
The RST520 Active Iridium Antenna can support an antenna cable loss of up to 12db and still maintain proper connection to the Iridium Network, an ideal antenna system for when there is no option but to have the terminal located a long distance from the terminal. |
| RST714 – Iridium Whip Antenna |
Beam Iridium WHIP Antenna (RST714) is designed for Land based applications. Designed to work with Beam Communication and will work with other Iridium based devices.
Iridium WHIP Antenna (RST714) is very good for 4WD / RUV and Truck applications where a ruggered antenna giving the highest possible clearance of the roof line is required and can be easily be fitted to the bull bar of a vehicle. 5m of antenna cable is included and attached to the antenna. |
| RST715 – Magnetic Antenna |
Iridium antenna (RST715) is designed for Land based applications. Designed to work with Beam Communication and will work with other Iridium based devices. Antenna cable is included and attached to the antenna. RST715 Iridium antenna also allows for easy removal and re fit.
|
| RST719 – Aeronautical Antenna |
Iridium antenna (RST719) designed for Aeronautical based applications. Designed to work with Beam Communication and will work with other Iridium based devices.
RST719 is designed to be low profile and is TSO approved C - 144. |
| RST720 – Bolt Mount Antenna |
|
| Prices & Call Plans |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2011 Satcom Hire & Sales